 |
Here are the Forte's Module assemblies:
|
|
11.65" AND 13" REAR BRAKE KITS
Description: We have the 11.65" and 13" brake kits available with standard, drilled and slotted.
|
Call |
|
|
13" Cobra Brake Kit (Fits SN95 Spindles)
Description: New COBRA calipers, 2 13" rotors & frt hoses Installation Notes: These fit SN-95 spindles only.
|
$850.00 |
|
|
13" Cobra front brake kit
Description: Complete front brake kit includes; SN-95 spindles, hubs, nuts, grease caps, 13 inch Cobra rotors, Cobra red calipers with pads.
Options; Slotted & Drilled, Dark gray calipers, stainless steel braided lines.
Slotted & drilled available!!!!
|
$1,517.00 |
|
|
1330 Series Driveshaft Yoke
Description: GM 27 spline, GM 32 spline, Mopar 30 spline
Tremec TKO 31 spline, T-5 & 3550 28 spline
|
$79.00
Special
$69.00 |
|
|
15:1 Steering Rack
|
$249.00
Special
$199.00 |
|
|
18:1 Steering Rack
|
$249.00
Special
$199.00 |
|
|
289, 302 & 351W or 351C Block plate
Description: Fits stock aluminum bellhousing for Tremec TKO, SROD, & T-5 for 157 tooth flywheel Related Parts: bellhousing, flywheel, clutch kit, clutch fork, pivot ball & cable, mounting hardware
|
$45.00 |
|
|
347ci Crate Engine - M-6007-C347
Description: 450hp @ 6000, 400 ft lbs @ 4900 Installation Notes: Needs 28oz. flywheel or flexplate. Reverse rotation water pump installed. Part Number: M 6007 C347
|
$8,600.00
Special
$8,500.00 |
|
|
351-W ENGINE, TKO-500, 8.8 REAREND, BRAKES ETC
Description: This module includes all new parts. aluminum head 351-W roller cam engine complete with Holley 670 Street Avenger, MSD 6AL box, coil & bracket, Powermaster 1 wire alternator, Powermaster mini starter, pulley kit & alt bracket with drive belt. This include
|
$15,380.00 |
|
|
390/427/428 FE Alternator Bracket Kit
|
$89.00 |
|
|
5-Lug Rear Disc Brake Conversion Kit New orders from 8/29/07 forward
Description: Includes axles, 10.5" rotors, calipers, brackets and hardware. Installation Notes: options: drilled/slotted rotor, black caliper(limited availability), 11.65" rotor.
|
$695.00
Special
$650.00 |
|
|
8.8 straight axle rearend 3.73 Trac lock rearend assembly minus axle
|
$850.00
Special
$795.00 |
|
|
Aluminum IRS Pumpkin with 3.08,3.27, 3.55, 3.73, or 4.10 Gears and Trac-loc
Description: PLEASE SPECIFY GEAR RATIO & AXLE SPLINE DESIRED Part Number: Fortes 4001 m your choice
|
$1,069.00 |
|
|
Big Block 429 / 460 Alternator Bracket
Description: 429 /460 alternator mount kit & pulleys
|
$350.00
Special
$299.00 |
|
|
Brake Bias Adjuster
Description: In cockpit brake bias adjuster. Fits Wilwood, CNC & Tilton dual master cylinder kits. Allows front to rear bias adjustments with the turn of a dash mounted knob.
|
$55.00
Special
$48.00 |
|
|
Bump Steer kit for 87-93 or SN-95 Spindles
|
$125.00 |
|
|
CNC Dual Brake Master Cylinder ASM. (SPECIFY MASTER CYLINDER DIAMETERS)
|
$310.00 |
|
|
Cobra Clutch Kit (pressure plate, disk and throwout bearing)
Part Number: M 7560 C302
|
$220.00 |
|
|
Cobra Front Brake Assembly - All New Spindles (SN-95), rotors, Calipers and Hubs
|
$1,537.00 |
|
|
Coil Overs Springs - SpringRrates Available up to 1000lbs (Pair)
|
$110.00 |
|
|
Collapsible steering shaft & U-joint with quick release hub
Description: Fits MK I & MK II
|
$475.00
Special
$375.00 |
|
|
External slave & billet fork conversion
Description: Developed by Mike Forte, this billet external slave & fork actuate the stock throw-out bearing. This is available for Chevrolet, FE Ford, 429-460 BB Ford & SB Ford. Part Number: FORD & CHEVY
|
$350.00
Special
$300.00 |
|
|
FFR Driveshaft kit
Description: These are custom made driveshaft kits complete with all new parts needed to install. Installation Notes: FFR driveshafts have many standard lengths. FFR MK I & MK II are the same with a small block. I stock many and build to fit your car at the same cost. Please specify transmission used, rearend used, model car & engine size. Related Parts: yoke, u-joint, rear flange, flange bolts
|
$249.00
Special
$225.00 |
|
|
Fill/Degas tank for Mustang or TriStates Radiator
Description: FITS MK I, MK II & MK III SMALLBLOCK ROADSTERS. NOT MADE FOR SPEC RACER OR DAYTONA. Installation Notes: Mounts to passenger side F-Panel Related Parts: UPPER HOSE, PAINLESS COOLANT SENSOR & RELAY KIT
|
$150.00 |
|
|
Ford Racing M-7560 C302 Cobra Clutch Kit
Description: King Cobra Clutch 10 Spline disc, Pressure Plate, and Throwout bearing
Installation Notes: Requires 157 tooth flywheel with a Mustang 10.5" bolt pattern. This will require a metric bolt & dowel kit for installation.
Part Number: M-7560 C302
|
$220.00 |
|
|
Forte's Clutch Alingment tool
Description: Steel clutch alignment tool 10 and 26 spline gm or ford availible Part Number: tool
|
$25.00
Special
$15.00 |
|
|
Forte's Power Steering Pump Mounting kit
Description: Billet aluminum bracket. Bracket surounds the pump and bolts to the water pump
fits 302/351 smallblock fords Part Number: P/S BRACKET
|
$125.00
Special
$110.00 |
|
|
FRPP 24 Lb/Hr Fuel Injectors (Set of 8)
|
$260.00 |
|
|
FRPP 4.88:1 Ring and Pinion Set
|
$249.95 |
|
|
Fuel Rails for 1986-1993 Mustang 5.0
Related Parts: EFI fuel pump, injectors, pressure regulator, lines & fitting
|
$80.00 |
|
|
Full 8.8 live axle ready to install
Description: 8.8 Ford rear end 3.73 axle ratio trac loc set from ford. Aluminum rear diff cover with support caps. 11.65" rear disc kit with drilled/sloted rotors and 5 lug axles. DOT legal rear ss brake lines. Pre bent hard lines on axle.
|
$1,875.00 |
|
|
Hard lines for 8.8 live axle
Description: Prebent 3/16 hard line for 8.8 axle. For use with pl-f5 braided ss hoses Part Number: fpc rr line
|
$30.00 |
|
|
HD T5 Z Transmission & bellhousing Module
Description: Heavy Duty T5 Z, 5 speed transmission including M-6392 E bellhousing. Installation Notes: M-6392-E bellhousing. Has 10 spline input shaft. 28 Spline output shaft.
2.95 first gear with a .63 fifth gear. Part Number: 1352-251
|
$1,902.00
Special
$1,550.00 |
|
|
Independent Rear Suspension Knuckle, Brakes and CV Shaft Kit
|
$1,345.00 |
|
|
IRS Knuckle, Brakes
Description: All new parts in pairs: 2/ IRS knuckles, 2/ 5 x 4.5" axle flanges, 2/ loaded calipers, 2/ 10.5" rotors, 4/ caliper mount bolts & 2/ stock brake hoses with banjo bolts
11.65" UPGRADE $150.00 Part Number: IRS KNUCKLES & BRAKES
|
$950.00 |
|
|
IRS Knuckle, brakes & CV shaft
Description: Complete rear IRS minus center section. Includes new knuckles, Cobra 5 x 4.5" bolt circle hubs, 10.5" rotors, loaded calipers, stainless hoses & banjo bolts.
The NEW CV shaft assemblies are assembled but require your FFR supplied CV shafts sent to RAXLE Part Number: IRS CV SHAFT, KNUCKLES & BRAKES
|
$1,645.00
Special
$1,505.00 |
|
|
M-1126 A 5 Lug Axles (Pair)
Description: DISCONTINUED
SUBSTITUTE: Replacement 28 spline 5 lug Mustang FOX width axles 59.5 inch.
DRUMS AVAILABLE FOR $40.00 PAIR
FREE SHIPPING FREE SHIPPING Related Parts: 8.8 rearend, brakes, Bearings and seals
|
$360.00
Special
$180.00 |
|
|
McLeod steel bellhousing for 302, 351W, 351C & 289
Description: McLeod SFI approved bellhousing that bolts to 302,& 351W & C engines. Later 1965 six bolt engines too. Designed to bolt a Ford Top Loader without any spacer plate. This includes the block plate & mounting hardware Installation Notes: This is available in many clutch release styles. It has a mounting tab to mount the "L bracket" fork pivot for OEM Ford linkage.
Forte's offers external slave options too. One is a push style billet fork, slave & pivot kit. The other is a pull style Part Number: 8624
|
$395.00
Special
$375.00 |
|
|
NEW Forte
Description: Designed to fit FFR roadster or coupe. Proper length. 5 lines in kit. Part Number: PL-F5
|
$175.00
Special
$140.00 |
|
|
Powermaster Chrome 1-Wire Alternator
|
$199.00 |
|
|
Powermaster Plain 1-Wire Alternator
|
$169.00 |
|
|
Pro Shock coil over kit
Description: Coil Over kit includes Pro Shocks, coil over adjusters & hats & springs Related Parts: brakes, spindles, brackets, springs, adjusters
|
$475.00
Special
$425.00 |
|
|
SB Ford Alternator Bracket (Does not include Alternator)
|
$125.00 |
|
|
SB Ford Alternator Kit - Chrome Alternator, Pulleys, Bracket and Belt
|
$450.00
Special
$429.00 |
|
|
SB Ford Alternator Kit - Plain Alternator, Pulleys, Bracket and Belt
Description: THIS FITS LATE MODEL 302 & 351 BLOCKS WITH LUG BELOW THE #1 CYLINDER.
NOTE: THIS SPECIAL MUST BE NOTED WHEN ORDERING.
|
$419.00
Special
$399.00 |
|
|
Stainless Steel Overflow Tank
|
$69.00 |
|
|
Steel Bellhousing - Ford
Description: Ford racing steel bellhousing by McLeod.Tremec 3550, TKO 500 & TKO 600 plus T-5 will fit right in. Installation Notes: MUST drill the front of the Tremec .530" for clearance for the 1/2" bolts needed for the transmission bolt. Related Parts: transmission, flywheel, clutch kit, fork & pivot, fork extension Part Number: 8660
|
$399.00
Special
$380.00 |
|
|
Steering Shaft with Detachable Wheel Hub (NASCAR Style) including Mota Lita Adapter (complete to rack)
Description: THIS IS COMPLETE FROM THE STEERING RACK INCLUDING U-JOINTS, SHAFT, 9" COLLAPSIBLE UPPER SHAT, QUICK RELEASE HUB & MOTA LITA ADAPTER. IT'S TOTALLY COMPLETE!!!
|
$475.00
Special
$375.00 |
|
|
Steering Wheel Adapter for Mota Lita Wheel
|
$35.00 |
|
|
T-5 TREMEC WORLD CLASS
Description: HD T-5 TRANSMISSION Part Number: 1352-251
|
$1,460.00
Special
$1,395.00 |
|
|
T-56 Midshifter for GM T-56
Description: Moves shifter to middle inspection plate position Installation Notes: Bolt on installation Part Number: t56 midshift
|
Call |
|
|
Thermostatic Oil Cooler Adapter with Fittings
Description: This MOCAL adapter includes -10AN male fitting. Related Parts: fittings, lines, coolers, adapters
|
$89.00 |
|
|
Timing Cover for Small and Big Block Ford
|
Call |
|
|
Tubular Lower Control Arms complete with Ford bolts for SN-95, 86-93 & Mustang II Spindles
Description: Developed for the FFR kits specifically made for coil over shock. Fits FOX, SN-95 or Mustang II spindles. Includes all mounting hardware. Installation Notes: These control arms include mounting hardware. Shock spacers are included for cil over hat clearance. The shock spacer may ned cutting for proper clearance. Related Parts: Coilover shocks, spindles & brake kit, calipers, rotors, brake lines
|
$325.00 |
|
|
Wilwood Triple Master Pedal Kit for FFR chassis
Description: TRIPLE MASTERS WITH CLUTCH & BRAKE PEDAL. BRACKET KIT INCLUDING BRAKE LITE SWITCH. FITS FFR CHASSIS. Installation Notes: AVAILABLE IN KIT OR PIECE BY PIECE. Related Parts: FRT & REAR BRAKES, STAINLESS LINES, CNC RESERVOIR, BIAS ADJUSTER Part Number: FFR BRAKE PEDAL KIT
|
$589.00
Special
$531.00 |
|
 |
'))
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
'))
'))
, rotors, Calipers and Hubs'))
'))
)
)
)
)
)
)
)
)
'))
)
)
)
)
)
)
)
)
'))
)
)
)
)
)
)
'))
)
)
)
)
 including Mota Lita Adapter (complete to rack)'))
)
)
)
)
)
)
)